Entering The Password; Navigating The Smt Interface; Figure 221 Initial Screen; Figure 222 Password Screen - ZyXEL Communications ZyWall 35 User Manual

Internet security appliance

Hide thumbs Also See for ZyWall 35:

Table of Contents

ZyWALL 35 User's Guide

26.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as

shown below.

For your first login, enter the default password "1234". As you type the password, the screen

displays an "X" for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your

ZyWALL will automatically log you out and display a blank screen. If you see a blank screen,

press [ENTER] to bring up the login screen again.

The SMT is an interface that you use to configure your ZyWALL.

Several operations that you should be familiar with before you attempt to modify the

configuration are listed in the table below.

OPERATION KEYSTROKES

Move down to

another menu

Move up to a

initialize ch =0, ethernet address: 00:A0:C5:01:23:45

initialize ch =1, ethernet address: 00:A0:C5:01:23:46

initialize ch =2, ethernet address: 00:A0:C5:01:23:47

initialize ch =3, ethernet address: 00:A0:C5:01:23:48

initialize ch =4, ethernet address: 00:00:00:00:00:00

AUX port init . done

Modem init . inactive

Press ENTER to continue...

Enter Password : XXXX

To move forward to a submenu, type in the number of the desired

submenu and press [ENTER].

Press the [ESC] key to move back to the previous menu.

Chapter 26 Introducing the SMT