The following table describes the labels in this screen.
LABEL
Default Server
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a Default Server IP Address, the Prestige discards all packets
received for ports that are not specified in this screen or remote management.
#
Number of an individual SUA server entry.
Active
Select this check box to enable the SUA server entry. Clear this checkbox to disallow
forwarding of these ports to an inside server without having to delete the entry.
Name
Enter a name to identify this port-forwarding rule.
Start Port
Enter a port number here. To forward only one port, enter it again in the End Port field.
To specify a range of ports, enter the last port to be forwarded in the End Port field.
End Port
NAT Screens
Figure 7-4 SUA/NAT Setup
Table 7-4 SUA/NAT Setup
DESCRIPTION
Prestige 324 User's Guide
7-9