Standard Delivery - Viessmann Vitodens 100 WB1 Technical Data Manual

Standard delivery

Standard delivery
Accessories required according to method of mounting (to be ordered at the same time)
Gas-fired condensing boiler with alumi
nium/silicon condensing heat exchanger,
modulating plaque-type radiant burner for
natural gas and LPG according to DVGW
code of practive G260, aqua-plate with
plug-in connection system, 2-stage heating
circuit pump and integrated diaphragm ex
pansion vessel.
Complete with piping and pre-wired ready
for connection.
Finish of epoxy resin coated sheet casing:
white.
With combination boiler:
Instantaneous water heater (plate-type heat
exchanger) for domestic hot water.
Packed separately:
Control unit for operation at constant tem
perature
or
control unit for weather-compensated
operation with standard programming unit.
Natural gas version
The Vitodens 100 is supplied ready for
use with natural gas E.
If ordered, a conversion kit is supplied for
natural gas LL.
Conversion to LPG is not possible.
LPG version
The Vitodens 100 is supplied ready for
use with LPG and can be converted for
use with natural gas.
22
Vitodens mounted directly on the wall
Mounting aid with
H fasteners
H fittings
H b" dia. gas shut-off valve with thermal
safety shut-off valve.
For installation on either finished or pre-
finished walls with screwed or soldered
connections.
or with mounting frame
Mounting frame (overall depth 110 mm)
with
H fittings
H fasteners
H boiler filling and drain cock
H b" dia. gas shut-off valve with thermal
safety shut-off valve.
For installation with either screwed or
soldered connections.