Enable Wireless Or Lan On The Projector - Dell 4220 User Manual

Enable Wireless or LAN on the Projector

1
Connect the power cable and turn on the projector by pressing the power
button.
2.1 If you choose the LAN connection mode, follow these steps to enable Wireless
and LAN function (default is Enabled): Advanced Settings
Wireless and LAN
2.2 If you choose the wireless connection mode, follow these steps to enable
wireless connection (default is Connected): Advanced Settings
Settings Wireless
NOTE:
If your want to use the wireless connection for 4220 or 4320 projector,
need installed the optional wireless dongle. See "Installing the Optional
Wireless Dongle" on page 11.
74 Using Your Projector
Enabled.
Connected.
http://www.pureglare.com.au
LAN Settings
Wireless