Enable Wireless or LAN on the Projector
1
Install the optional wireless module kit (optional in S320). See "Installing the
Optional Wireless Module Kit" on page 14.
NOTE:
If you select install the LAN module kit (optional), see "Installing the
Optional RJ45 Kit" on page 16.
2
Connect the power cable and turn on the projector by pressing the power
button.
NOTE:
If the LAN is used for audio projection, follow these steps to enable Wireless
a
and LAN function (default is Enabled): Advanced Settings
Wireless and LAN
If the Wireless is used for audio projector, please install a wireless dongle to
b
your projector.
3
Access the Input Source menu, select the Wireless/USB and then select the
Wireless Display on the sub-menu.
Enabled.
Using Your Projector
LAN Settings
91