Table of Contents
Advertisement
Appendix
#5. Upgrading i-Rec B104 Firmware
Warning
<
>
This process is to upgrade i-Rec B104 with
Make sure to complete the whole process,. When the process is completed, 'User Image
Upgrade is complete' message appears. During the process, do not give physical shock nor
disconnect network and power. Otherwise, your i-Rec B104 can be damaged seriously, which
may result in inappropriate operation or operation failure.
If you failed in upgrading i-Rec B104 firmware or i-Rec B104 does not operate properly after
successful upgrading process, contact WGI distributor in your area.
#5.1. Connecting i-Rec B104 to PC
Connect i-Rec B104 to PC with a crossover cable directly. This connection is recommended.
It is also possible to connect i-Rec B104 to a PC through a HUB with direct cable.
<Note>
You may also do the process on a remote network, but it is not recommended.
#5.2. Upgrade firmware with upgrading program
(1) Open 'MS Dos' window and practice a command <c:\arp –d>.
WEBGATE Inc.
new firmware.
2003. 06. 30 (v 1.4)
i-Rec B104
59
Advertisement
Table of Contents
