Table of Contents
Advertisement
Installing & Connecting
8.3. Connecting Sensor Input
8.3.1. Specifications of Sensor Input
In order to run sensor input of i-Rec B104 normally, the following conditions are required.
Input Ch.
Input type
Spec.
Supported sensor
Connecting
Available input pulse
range
Performance
Output current
8.3.2. Sensor Input Port View
8.3.3. Connecting & Setting
8.3.3.1. Diagram
Connect S1 ~ S4 with referring to "2.4.2 Connecting". The following figure is for connecting a
dry contact. When connecting a non- dry contact type of sensor (e.g. Open collector output)
please contact WEBGATE's Customer Support team.
WEBGATE Inc.
4Ch. Photo coupler differential inputs
N.C. (Normal Close) type
Dry contact
Connecting the trimmed wire to terminal block
Min. 500ms
Typical DC 12mA
2003. 06. 30 (v 1.4)
i-Rec B104
37
Advertisement
Table of Contents
