Installing & Connecting
i-Rec B104
8.4. Connecting Impedance Setup Switch for Video Input
When one video output is connected to several inputs (e.g. CCTV monitor, i-Rec) as below, the
impedance of one input should be 75 ohm.
The impedance will be set as 75ohm by selecting 75ohm.
If you select Hi-z, the impedance will be unlimited.
8.5. Video Input
4 video inputs for external cameras can be connected Please refer to the above figure for
connecting.
WEBGATE Inc.
39
2003. 06. 30 (v 1.4)