Connecting I-Rec B104 To Network; Connecting I-Rec B104 To Pc Directly - WebGate i-Rec B104 Installation Manual

Installing & Connecting i-Rec B104

4.2. Connecting i-Rec B104 to Network

Connect i-Rec B104 to client's PC directly with crossover cable or through HUB with direct cable.
Please refer to the following figures.

4.2.1. Connecting i-Rec B104 to PC directly

(1) Connect i-Rec B104 to client's PC with crossover cable (Red Ethernet cable).
(2) After supplying power to AC adapter, connect DC12V connector to B104.
(3) If PC is set with dynamic IP, change it into suitable IP address on same network. For more
detailed information, please refer to "Appendix #3 Setting the fixed IP address on PC".
WEBGATE Inc. 11
2003. 06. 30 (v 1.4)