i-Rec B104
Installing & Connecting
4. Installing i-Rec B104
This user's guide describes the most two common network conditions for installing B-104:
(1) i-Rec B104 and administrator's PC uses fixed or private IP address.
(2) Computers and B104 are connected directly or to local network.
4.1. Connecting cameras to i-Rec B104
(1) Connect i-Rec B104 to camera(s) with BNC Cable.
(2) Set impedance control switch of the connected channel. Set impedance by moving switch
<Note>
For more exact settings, please refer to "Impedance setup switch for video Input" of "Input /
Output" in User's Guide.
10
2003. 06. 30 (v 1.4)
Installing & Connecting
WEBGATE Inc.