i-Rec B104
8.3.3.2. Connecting
The above figure illustrates connecting a sensor to i-Rec B104. For connecting wires, please
refer to manual of related sensor and "Trimming wire" part of this manual. Insert the wire and
spin the screw of terminal block with flathead "-"shaped driver.
8.3.3.3. Setting
Access i-Rec B104 with CamViewer program and configure sensor input.
8.3.4. Connecting sensors for 1.0 or below main version PCB of i-Rec B104
Previous versions of model's sensor circuit are different from current one.
Input Ch.
Spec.
Input type
Connecting
Available input pulse range
Performance
Recommended input voltage
Recommended input current
Diagram
38
4Ch. Photo coupler differential inputs
N.C. (Normal Close) type
Connecting the trimmed wire to terminal block
Min. 500ms
DC +12V (±10%)
Typical DC 10mA
2003. 06. 30 (v 1.4)
Installing & Connecting
WEBGATE Inc.