Table of Contents
Advertisement
i-Rec B104
5.3. Setting IP address
(1) Click "Network" Tab.
(2) Input the assigned values of "IP Address", "Network Mask", "Gateway Address" into
"Ethernet" menu.
(3) Click "Apply" button.
<Note>
1. Be careful on typing values into this menu. Without correct network address, nobody will
be able to connect to i-Rec B104.
2. Refer to the User's guide in setup CD-ROM to install i-RecB104 on Dynamic IP network
environment.
3. If a network firewall is installed, change the port number at "Port Assignment".
16
2003. 06. 30 (v 1.4)
Installing & Connecting
WEBGATE Inc.
Advertisement
Table of Contents
