Table of Contents
Advertisement
Quick Links
Part No: TRANS TX
This unique device enables your chosen Rhino Vehicle Security System (Model RAM,
RAv2 or JAG) to be controlled via the original keyless entry remote controls supplied
by your vehicle manufacturer.
When you lock your car doors using your original factory remote, you will also be
automatically arming (turning on) your chosen Rhino Vehicle Security System.
When you unlock your car doors using your original factory remote, you will also be
automatically disarming (turning off) your chosen Rhino Vehicle Security System.
This product is to be installed in accordance with the methods & principles detailed in
AS 3749.2:1997
Instruction Manual
Thank you for purchasing a quality Rhino Vehicle Security Product.
Please read this manual carefully before commencing installation and keep it in a safe place
for future reference.
Transform Standard Factory Fitted
Security System To Rhino
Standard Suitable For RAM, RAv2
& JAG
TRANS TX 18102006.doc
1
Proudly Designed
in Australia
N517
Made in
Taiwan
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RHINO Trans TX
Summary of Contents for RHINO Trans TX
- Page 1 Made in Taiwan & JAG This unique device enables your chosen Rhino Vehicle Security System (Model RAM, RAv2 or JAG) to be controlled via the original keyless entry remote controls supplied by your vehicle manufacturer. When you lock your car doors using your original factory remote, you will also be automatically arming (turning on) your chosen Rhino Vehicle Security System.
- Page 2 This is how the TRANS TX knows to only arm/disarm the alarm when the factory remote is pressed.
- Page 3 2.Changing Setting 2/Setting 1 (Inhibit mode/Enable Mode) The intelligent TRANS TX unit can easily switch between Setting 1 ‘Enable mode’ & Setting 2 ‘Inhibit Mode’. Setting 1 ‘Enable mode’: Allows the negative inputs to be connected, and learnt, as wires that will arm/disarm the alarm.
- Page 4 3.Learn vehicle into the TRANS TX Module The intelligent TRANS TX unit now must learn Lock, Unlock and boot. 1. Sit in the vehicle, close all doors and lock the vehicle with the factory Sit in vehicle remote. with vehicle locked.
- Page 5 NOTE: If purchased as a complete unit, you do not need to learn in the TRANS TX or activate TRANS TX mode. Learn the TRANS TX into the alarm (RAM, JAG, RAv2) 1. Turn the vehicle ignition on. Press Turn the vehicle...
- Page 6 • • • • Use a multi - meter to verify any wires nature. • • • • Connect the harness to the TRANS TX module as shown below. • • • • Diodes: 1 Amp is 1N4004, 3 Amp is 1N5404.
- Page 7 WARRANTY TERMS & CONDITIONS RhinoCo Technology (The Company) warrants its products to be in conformance with its own plans and specifications and to be free from defects in materials and workmanship under normal use and service for 12 months from the date stamp control on the product, or for products not having a date stamp, for twelve months from the date of original purchase unless the installation instructions or catalogue sets forth a shorter period, in which case the shorter period shall apply.
- Page 8 www.rhino.com.au...
Need help?
Do you have a question about the Trans TX and is the answer not in the manual?
Questions and answers