Rackmount Setup - Minuteman 6-10KVA Tower User Manual

3.5 Rackmount Setup

CAUTION:
The cabinet is heavy, so:
1) Remove the battery tray from the UPS before lifting.
2) Lifting the cabinets into the rack requires a minimum of two
people.
CAUTION: Removing the batteries should be performed or
supervised by personnel with knowledge of batteries and the
requieres precautions. Keep unauthorized personnel away from
batteries.
CAUTION: If installing an EBM, install the EBM directly below the
UPS.
3.5.1 To install the UPS and EBM in a rack:
1. Open the front panel and put it above the UPS.
Figure 12. Open the front panel (left: 6K Model, right: 10K Model)
2. Remove the battery protection plate (see Figure13):
Figure 13. Removing the Battery Protection Plate
14