National Electric Code, ANSI/NFPA Please read this manual before installing your PRO Rack/Tower Series UPS, models PRO1000RT, PRO1500RT as it provides important information that CAUTION! To reduce the risk of electrical shock with the installa-...
3 "Installation" for connecting the batteries. PRO1000RT Total harmonic 57.2% Single harmonic 46.1% PRO1500RT Total harmonic 42.8% Single harmonic 26.6% Life Support Policy As a general policy, we do not recommend the use of any of our products in life...
Page 5
6-NEMA 5-15R Battery Backup & Surge NEMA 5-15P W/10 ft cord 2-NEMA 5-15R Surge Only PRO1500RT 1. Scroll Button: To scroll through the UPS parameters. 2. Battery Capacity Bar Graph: Displays the amount of Battery Capacity available in the AC and Battery mode.
Page 6
RACKMOUNT CONFIGURATION INSTALLATION This UPS comes with mounting brackets for the standard 19" (46.5cm) rack. Be sure to read the installation placement and all the cautions before installing the UPS. Place the UPS in the final desired location and complete the rest of The mounting brackets to fit a 23"...
Page 7
4. Use the template to mark the screw hole position on the wall. CAUTION, 2. The LCD face plate can be rotated to read in the up-right position. Remove the front panel from the UPS. On the backside of the front panel, push the you should always were protective gear for your hands and eyes when operating power tools.
Page 8
CONNECTING THE UPS TO AN AC SOURCE CAUTION - To reduce the risk of fire, connect only to a circuit provided with 20 amperes maximum branch circuit over-current protection in accordance with the National Electric Code, ANSI/NFPA 70. Plug the UPS into a two pole, three wire, grounded receptacle only.
Page 9
USB COMMUNICATIONS PORT LCD SCREEN This UPS series supports USB communications. Use the interface cable that comes he LCD provides the user with a variety of useful information. The LCD has a real- with the UPS. The USB communications protocol is HID. The HID USB driver time meter to display, in numeric fashion, the following data: comes standard in the Windows OS.
Page 10
REPLACING THE BATTERY Possible Cause What To Do Symptom (QUALIFIED SERVICE PERSONNEL ONLY) On/Off/Test button not Press, hold and then release UPS will not turn on Please read all of the WARNINGS and CAUTIONS before attempting to service the On/Off button to start UPS pressed the batteries.
Page 11
7. Lay the front panel on top of the UPS. installed in the UPS. These batteries have pressure operated vents. These UPSs contain sealed non-spillable maintenance-free lead FIG. 2 acid batteries. PRO1000RT PRO1500RT Model # Battery Module Part # BM0043 BM0044 BATTERY REPLACEMENT PROCEDURE...
Technical Support department at the following numbers; Voice phone (972) 446-7363, FAX line (972) 446-9011 or contact Minuteman UPS at mmsupport@minutemanups.com. Please have the following information available BEFORE calling the Techni- cal Support Department.
Battery Module Part # BM0043 BM0044 SYSTEM SPECIFICATIONS Runtime: Half Load (minutes) Runtime: Full Load (minutes) PRO1000RT PRO1500RT Model Number SURGE PROTECTION AND FILTERING Topology Line-Interactive, Simulated Sine Wave Surge Energy Rating 1140 J Surge Current Capability...
For equipment sites within the United States and Canada, this Manufacturer’s Name: Para Systems, Inc. (MINUTEMAN UPS) warranty covers repair or replacement of defective equipment at the discretion of Para Sys- tems.