ESAB Warrior Feed 304 Instruction Manual page 33

GB
Read and understand the instruction manual before installing or operating.
PROTECT yourself and others. ARC PROCESS can be hazardous.
S
Before use, read and follow all labels, the manufacturer's instruction manual,
employer's safety practices, and Material Safety Data Sheets (MSDSs).
S
Only qualified persons are to install, use or service the equipment
ELECTRIC SHOCK can kill.
S
Do not touch live electrial parts.
S
Always wear dry insulating gloves.
S
Insulate yourself from work and ground.
S
Disconnect input power before servicing unit.
FUMES AND GASES can be hazardous to your health.
S
Keep your head out of the fumes.
S
Use enough ventilation, exhaust at the arc, or both to keep fumes and gases
from your breathing zone and the general area.
SPARKS AND SPATTER can cause fire or explosion.
S
Do not use near flammable material.
S
Do not use on closed containers.
ARC RAYS can injure eyes and burn skin. NOISE can damage hearing.
S
Wear correct eye, ear and body protection.
MOVING PARTS can injure.
S
Keep away from moving parts.
S
Keep all doors, panels, covers, and quards closed and securely in place.
DO NOT REMOVE, DISTROY OR COVER THIS LABEL
CAUTION
Read and understand the instruction manual before
installing or operating.
CAUTION
Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low-voltage supply system.
There may be potential difficulties in ensuring electromagnetic
compatibility of class A equipment in those locations, due to conducted
as well as radiated disturbances.
CAUTION
This product is solely intended for arc welding.
bm55d1e
WARNING
- 33 -
© ESAB AB 2013