C O N N E C T I N G T H E S E R I A L T R A N S M I S S I O N L I N K Connect the RoboZap, or the first unit in the link, to the controller, using the 10 metre XLR cable which came with the controller.
O P E R AT I N G W I T H O U T A C O N T R O L L E R ( S TA N D A L O N E ) When operating the RoboZap without a controller you have a choice of programs. Please refer to the Sequence Settings table below and set the DIP switches to the settings for the desired program.
Page 4
S P E C I F I C AT I O N S RoboZap Dimensions with/without bracket: Length 550 mm / 550 mm Width 180 mm / 130 mm Height 330 mm / 210 mm Weight: 11.0 Kg Power consumption:...