Event - Event Status - Eneo DLR1.1-04N/250V Operating Instructions Manual

Setup menu (continued)
Event – Event Status
The "Event Status" menu indicates the status of all possible events:
● Grey text: Event detection not enabled
● White text: Event detection enabled
● Flashing border: Message – acute event for 5 sec
● Yellow field: Pending event
Setup Menu...
Term
Alarm-In
Check Alarm-In
Motion
Video Loss
Text-In
Panic Record
Check Recording
Disk Almost Full
Disk Full
Fan Error
Setup Menu...
Term
Type
Disk Bad
Temperature
S.M.A.R.T.
DLR1.1-04/xxxV
Event Event Status
Event
At alarm input 1 to 4
Error detected at one of alarm inputs 1 to 4
Motion detected on camera 1 to 4
Video loss on camera 1 to 4
Text input on text input device 1 to 4
Panic recording
On checking the recording
On checking the data medium (only if DVR is not operating in Overwrite
mode)
On checking the data medium (only if DVR is not operating in Overwrite
mode)
Error of fan
Event Event Status
Meaning
Memory type
Data carrier status
Data carrier status
Result of S.M.A.R.T. check
Event Status
Storage
5