Using Only The Front Speakers (2 Channel Stereo) - Sony AVD-LS10 Operating Instructions Manual

DRC (Dynamic Range Compression)
Control
With the DVD format you have the
opportunity to hear a programme's
soundtrack in the most accurate and realistic
presentation possible, thanks to the use of
digital audio technology. However, in
certain instances you may wish to slightly
compress the dynamic range of the audio
output (the difference between the loudest
sounds and the quietest ones) so that you
may listen to a movie at a lower volume
without losing dialogue intelligibility.
STANDBY
MEMORY/CLEAR
Press and MEMORY/CLEAR on the
front panel for 5 seconds, "DRC ON"
appears on the front panel display.
Press these buttons again, then "DRC OFF"
appears on the front panel display about 2
seconds.
xDRC ON : Select this option to turn on the
Dynamic Range Compression circuity so that the
dialogue remains clear even at low levels.
xDRC OFF : Select this option to turn off the
Dynamic Range Compression and have the
soundtrack presented exactly as it was created.
Notes
The DRC function works only during playback of
Dolby Digital recorded discs.
The level of Dynamic Range Compression may differ
depending on the DVD disc.
MEMORY/CLEAN - TUNING + BAND
DVD RECEIVER AVD-LS10
Using only the front
speakers
(2 Channel Stereo)
1 2 3
4 5 6
7 8 9
0
Press 2 CH, "SURR OFF" appears on
the front panel display.
This mode outputs the sound from the front
left and right speakers only. Standard 2
channel (stereo) sources completely bypass
the sound field processing. Multi channel
surround formats are downmixed to 2
channel.
To set the Audio Output mode
1
Press 2 CH.
The present ouput mode will appear in
the display window. (5 CH mode or 2
CH mode)
2
Press X/x to change the output mode.
3
Press ENTER, then the present output
mode will be changed.
The setting mode is completed.
2CH
continued
GB
47