Using Only The Front Speakers (2 Channel Stereo); Adjusting The Level Parameters - Sony AVD-SSOES Operating Instructions Manual

Using only the front
speakers
(2 Channel Stereo)
SOUND
FIELD
Press 2CH ST on the receiver or
SOUND FIELD on the remote repeatedly
until '"2CH STEREO" appears on the
front panel display.
This mode outputs the sound from the front
left and right speakers only. Standard 2
channel (stereo) sources completely bypass
the sound field processing. Multi channel
\LlrroLlncl formals are tlo\~nlllixecl to 2
c~llallllcl.
Adjusting the level
parameters
~~#@4if@b
The level menu contains parameters that let
you adjust the balance and speaker volumes
of each speaker (page 27).
ENTER
l I'w+
-AMP MENU
1
2
3
4
Start playing a program source
encoded with multichannel
surround sound.
Press AMP MENU repeatedly.
j LEVEL appears on the front panel
display.
Sit in your listening position and
select the item to be adjusted
using +I+.
Adjust the volume level using C/j.
The adjusted value will appear on the
front panel display. If you do not operate
the remote for a few seconds, the value
turns off and is stored in the receiver.
5lUS