Setup - Network Mode - Nadatel SDVR-9000C User Manual

3-8. Setup – Network Mode
Set up your network parameters on the Network Setup screen.
Item
PORT
CLIENT ACCESS
BANDWIDTH SAVING
NETWORK TYPE
DHCP
ADSL (PPPoE)
LAN
DDNS
Figure 3.8.1. NETWORK setup screen
Table 3.8.1. Menu items in Network Setup screen
Port number (Default: 5445)
Enable/Disable remote access through client software.
Enable/Disable only key frame transmission. "ON" mode is
favorable for use of low network bandwidth. Mostly, set "OFF" for
normal use.
Set the type of network connection. Options are:
LAN, DHCP, ADSL
Note. Other parts of the Network Setup screen change depending
on what network type you select.
Sets to use HDCP (If this is selected, DVR automatically get IP
varying from time to time from network.)
ID: Registered ID is necessary for ADSL connection.
Password: Registered pasword is necessary for ADSL connection.
IP: Register IP address that is assigned for DVR.
Gateway: Register Gateway that is assigned for DVR.
Subnet Mask: Register Subnet Mask that is assigned for DVR.
Enable/disable using domain name address through DDNS server.
"ON" mode, DDNS server name appears for domain registration.
Description
37