Alarm-Out - Nadatel SDVR-9000C User Manual

Table 3.4.1. Menu items in Device Setup screen
Item Description
Set the sensor, motion, and video loss for each alarm.
ALARM OUT
SPOT-OUT Set the all details for spot monitoring.
PTZ Set the PTZ camera speed, number, type and ID.
Select specified channel for motion zone setup.
CHANNEL
MOTION ZONE Select Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.
Enable/disable key tone.
KEY TONE
Select an ID of remote control.
REMOTE CONTROL ID
1. Select ID.
2. Press the same number as ID set in DVR on a remote
control.
3. Then icon will be displayed on Live screen of DVR
that respond to the remote control.
SENSOR Select sensor from 1 to 9(16).
TYPE Set the type of sensor for the specified channel. Options are:
None, N/O (normal open), and N/C (normal closed).

3-4-1. ALARM-OUT

Figure 3.4.2. ALARM-OUT setup screen
Table 3.4.2. Menu item in ALARM-OUT Setup screen
Item Description
27