View Transfer Activity To The Reporting Device - M86 Security M86 Web Filter User Manual

6. Click Save.
In the FTP Log Update frame:
1. At the Hour field, make a selection from the pull-down
2. Click Save.

View Transfer Activity to the Reporting Device

After logs have been transferred from the Web Filter to the
reporting device, the Log tab can be clicked to view transfer
activity.
On this tab, click View Log to view up to the last 300 lines of
transfer activity in the View Log frame.
M86 S U G
ECURITY SER UIDE
G
LOBAL
menu (1, 2, 3, 4, 6, 8, 12, 24) to specify the interval
between hours—in military time—when the update
should occur:
1 = updates occur each hour.
2 = updates occur every two hours, at these intervals of
time: 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24.
3 = updates occur every three hours, at these intervals of
time: 3, 6, 9, 12, 15, 18, 21, 24.
4 = updates occur every four hours, at these intervals of
time: 4, 8, 12, 16, 20, 24.
6 = updates occur every six hours, at these intervals of
time: 6, 12, 18, 24.
8 = updates occur every eight hours, at these intervals of
time: 8, 16, 24.
12 = updates occur every 12 hours, at these intervals of
time: 12, and 24.
24 = updates occur every 24 hours.
A S
DMINISTRATOR ECTION
C 4: R
HAPTER EPORTING SCREEN
319