Verify Smtp Settings - M86 Security M86 Web Filter User Manual

4. By default, Authentication is disabled. Click "Enable" if
5. Click Apply to apply your settings.

Verify SMTP Settings

To verify that email messages can be sent to a specified
address:
1. Click Test Settings to open the pop-up box:
2. Enter the email address in the pop-up box.
3. Click OK to close the pop-up box and to process your
M86 S U G
ECURITY SER UIDE
G
LOBAL
a username and password are required for logging into
the SMTP server. This action activates the fields below.
Make the following entries:
a. Enter the Username.
b. Enter the Password and make the same entry in the
Confirm Password field.
Fig. 2:1-30 SMTP Test Settings box
request. If all SMTP Server Settings are accepted, the
test email should be received at the specified address.
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
127