Enable The Alert Feature; Modify Alert Settings; Disable The Alert Feature - M86 Security M86 Web Filter User Manual

Enable the Alert Feature

By default, the "Disable" radio button is selected. To enable
the feature for sending automated email notifications:
1. Click the "Enable" radio button to activate all elements in
2. Enter up to four email addresses of contacts.
3. Click in the checkbox of each email address that should
4. If using an SMTP server for sending alert email
5. Click Apply to apply your settings.

Modify Alert Settings

1. Make any of the following edits in the Emergency Email
2. After all edits have been made, click Apply to apply your

Disable the Alert Feature

1. Click the "Disable" radio button.
2. Click Apply to apply your settings.
M86 S U G
ECURITY SER UIDE
G
LOBAL
the Emergency Email Notification frame.
receive notifications regarding network problems.
messages to designated administrators, enter the email
address of the Web Filter in the From Email Address
field.
Notification frame:
• change an email address by typing the new one over
the existing one
• deactivate a contact by removing the check mark from
the checkbox corresponding to that contact's email
address
• delete a contact by using your mouse to copy over the
entire email address, and then pressing the Delete key
on your keyboard
settings.
A S
DMINISTRATOR ECTION
C 1: S
HAPTER YSTEM SCREEN
125