Schedule A Backup; Configure Ftp Server Settings - M86 Security M86 Web Filter User Manual

Hide thumbs Also See for M86 Web Filter:

Table of Contents

Schedule a Backup

1. In the Server Configuration section of the Scheduled

2. In the FTP Directory field, enter the path where log files

3. In the Username field, type in the valid username for

NOTE: The passive mode is used for transferring backup files to

the server via FTP.

4. In the Password and Confirm Password fields, type in

5. Click Apply to open the Server Configuration dialog box

TIP: Click No to close the dialog box without saving your settings.

6. Click Yes to close the dialog box and to open a Message

7. Click OK to close the alert box.

You can now set up a schedule for a backup in the Recur-

rence Schedule section of the Scheduled Backup frame.

Backup frame, enter the IP address of the Remote

will be stored.

FTP transfers.

the password for the username specified in the FTP

Directory field.

asking if you wish to save your settings.

alert box indicating that your settings have been saved.

DMINISTRATOR

YSTEM SCREEN