Step 3: Replace The Failed Power Supply; Step 4: Contact Technical Support - M86 Security M86 Web Filter User Manual

A S
PPENDICES ECTION
510
A F
PPENDIX

Step 3: Replace the failed power supply

Remove the failed power supply by locating the red release
tab (1) and pushing it to the right (2), then lifting the curved
metal handle and pulling the power supply module towards
you (3).
Note that an audible alarm sounds and the LED is unlit
when the power supply is disengaged. Replace the failed
power supply with your spare replacement power supply.
The alarm will turn off and the LED will be a steady green
when the replacement power supply is securely locked in
place.

Step 4: Contact Technical Support

Contact Technical Support to order a new replacement
power supply and for instructions on returning your failed
power supply to M86.
M86 S U G
ECURITY SER UIDE