Add Individual Ip; Add An Individual Ip Member - M86 Security M86 Web Filter User Manual

G A
ROUP DMINISTRATOR
380
S C 1: P
ECTION HAPTER

Add Individual IP

Add an Individual IP Member

From the group menu:
1. Click Add Individual IP to open the Create Individual IP
dialog box:
Fig. 3:1-28 Create Individual IP box
2. Enter the Member Name for the Individual IP address.
NOTES: The name of the individual IP address must be less than
20 characters; cannot be "IP" or "LDAP", and cannot contain
spaces. The first character cannot be a digit.
The following characters cannot be used in the name: "." (period),
"," (comma), ":" (colon), ";" (semi-colon), "!" (exclamation point),
"?" (question mark), "&" (ampersand), "*" (asterisk), """ (quotation
mark), "'" (apostrophe), "`" (grave accent mark), "~" (tilde), "^"
(caret), "_" (underscore), "|" (pipe), "/" (slash), "\", (backslash)",
"\\" (double backslashes), "(" (left parenthesis), ")" (right paren-
thesis), "{" (left brace), "}" (right brace), "[" (left bracket), "]" (right
bracket), "@" (at sign), "#" (pound sign), "$" (dollar sign), "%"
(percent sign), "<" (less than symbol), ">" (greater than symbol),
"+" (plus symbol), "-" (minus sign), "=" (equals sign).
3. Click OK to close the dialog box and to add the individual
IP member to the master IP group in the Policy tree.
WARNING: When adding an Individual IP member to the tree list,
the user will be blocked from Internet access until the minimum
filtering level profile is defined via the Minimum Filtering Level
window. The minimum filtering level is established by the global
administrator.
OLICY SCREEN
M86 S U G
ECURITY SER UIDE