Disable Customer Feedback Module; Enable Customer Feedback Module - M86 Security M86 Web Filter User Manual

Hide thumbs Also See for M86 Web Filter:

Table of Contents

DMINISTRATOR

WARNING: This feature is enabled by default. Please refer to the

sub-section Enable Customer Feedback Module to review the

contents of the disclaimer that applies when this feature is

NOTE: For optimum results when using this feature, M86 recom-

mends enabling Alert Settings and entering at least one email

address that an M86 technical suppport representative can use to

contact you for assistance. (See Alert Settings window in Chapter

1: System screen for information about enabling this feature.)

Disable Customer Feedback Module

1. At the Customer Feedback Module - Auto Learning

Feature field, click "Off" to indicate that you wish to

disable the Customer Feedback Module.

2. Click Apply.

1. At the Customer Feedback Module - Auto Learning

Feature field, click "On" to indicate that you wish to

enable the Customer Feedback Module.

2. Click Apply to open the Disclaimer dialog box:

Fig. 2:3-15 Disclaimer box

IBRARY SCREEN