5. Once the Avance Logic software driver is installed, to change
back to the standard VGA driver, double click on the Avance
Logic icon and in response to the question, "Do you want to
change the VGA driver?", press [Enter] to answer Yes (default)
and the system will reinstall the standard VGA driver. Per-
form a Shutdown and reboot the system to activate the change.
6. To change back to the Avance Logic software driver, double
click on the Avance Logic icon and press [Enter]. The Avance
Logic software driver will be reinstalled. Perform a Shutdown
and reboot the system to activate the change.
Chapter 5 SVGA Setup
49