Table of Contents
Advertisement
2. To install the Avance Logic software driver:
•
In the OS/2 desktop, double click on the OS/2 System
program group icon.
•
In the OS/2 System - Icon View, double click on the
Command Prompts program group icon.
•
In the Command Prompts - Icon View, double click on the
OS/2 Full Screen program icon.
•
When the C:\> prompt is displayed , insert the ALG2032
Driver for OS/2 Warp SVGA applications diskette into diskette
drive A if it is not already inserted.
•
At the C:\> prompt, type a: and press [Enter].
•
At the A:\.> prompt, type install, press [Enter] , and follow
the instructions on the screen.
•
When the installation finishes, select the desired resolution
in the System Settings dialog box, remove the Avance Logic
software driver diskette from diskette drive A.
3. Reboot the system to activate the changes.
4. To change the resolution, refresh rate, or monitor make/type:
•
In the OS/2 Desktop, double click on the OS/2 System
program group icon.
•
In the OS/2 System - Icon View, double click on the
System Setup program group icon.
•
In the System Setup - Icon View, double click on the
System program icon.
•
In the System Settings dialog box, select the desired
resolution and/or refresh rate and make any changes to the
monitor make/type.
•
Perform a shutdown and reboot the system to activate the
changes.
48 SBC-590 User's Manual
Advertisement
Table of Contents
