Table of Contents
Advertisement
"LOAD BIOS DEFAULTS" indicates the most appropriate values
for the system parameters for minimum performance. These
default values are loaded automatically if the stored record created
by the Setup program becomes corrupted (and therefore unusable).
"LOAD SETUP DEFAULTS" loads the values required by the
system for maximum performance.
To change, confirm, or disable the password, choose the "PASS-
WORD SETTING" option form the Setup main menu and press
[Enter]. The password can be at most 8 characters long.
Remember, to enable this feature. You must first select the
Security Option in the BIOS FEATURES SETUP to be either
"Setup" or "System."
"IDE HDD AUTO DETECTION" automatically self-detect for the
correct hard disk type.
If you select this and press the [Enter] key, the values entered in
the setup utilities will be recorded in the CMOS memory of the
chipset. The microprocessor will check this every time you turn
your system on and compare this to what it finds as it checks the
system. This record is required for the system to operate.
Selecting this option and pressing the [Enter] key lets you exit the
Setup program without recording any new values or changing old
ones.
42 SBC-590 User's Manual
Advertisement
Table of Contents
