Aaeon SBC-590 User Manual page 53

Verify that Windows NT 3.51 is corectly installe don the system
and then perform the follwoing procedure to install the Avance
Logic software driver.
1. To begin the installation of the Avance Logic software driver
on the fixed disk:
•
In the Program Manager window, double click on the Main
program group icon.
•
In the Main window, double click on the Contrl Panel
programgroup icon.
•
In the Control Panel window, double click on the Display
icon.
•
In the Display Settings window, click on [Change Display
Type].
•
In the Display Type dialog box, click on [Change].
2. If installing the Avance Logic software driver from diskette, in
the Select Device dialog box, click on [Other] and insert the
ALG2032 Driver for Windows NT 3.51 applications diskette
into drive A. When the Install from Disk dialog box is
displayed, click on [OK] and proceed to the next step. If the
Advance Logic software driver is already installed, proceed to
the next step.
3. In the Select Device dialog box, select Avance Logic, Inc. and
click on [Install]; when the installation is complete, click on
[OK].
4. In the Display Settings window, select the desired resolution
and refresh frequency and click on [Test] to test that the system
monito can display the selected parameters properly.
5. If an Avance Logic software driver diskette was inserted into
diskette drive A earlier, remove it now.
6. To activate the new settings, restart the application.
46 SBC-590 User's Manual