Table of Contents
Advertisement
If Windows 95 is not installed on the system, install it using the
manufacturer's installation procedure. In each section where the
display option is selected, select VGA.
1. Double click on the My Computer icon.
2. Double click on the Display icon to bring up the Display
Properties window.
3. Click on the Settings tab to change the Display Type to
standard VGA if it is not already selected.
4. Click on the Change Display Type button to bring up the
Change Display Type window.
5. Click on the Change Display Type button in the Adapter Type
section of the window to bring up the Selection Device
window.
6. Click on the [Have Disk] button if you need to select a
different install driver option. Click on [OK].
7. When the copying of the diskette is complete, the Change
Display type window will return. If you need to change your
monitor resolution or type, click on [Close] in the Change
Display Type window to bring back the Display Properties
window.
8. Select the desired resolution, color and font size values in the
Display Properties Window and then clike on [Apply] to bring
back the System Settings Change window. The refresh rate
will be adjusted properly based on the monitor type selected.
9. Click on [Yes] in the System Settings Change window to
restart the system and activate the new settings.
Chapter 5 SVGA Setup
45
Advertisement
Table of Contents
