Dash Led Status Indicator; Replacement Of Battery - Code Alarm TW-1 Owner's Manual

23. I System status-indicator LED I
Fix the LED status indicator at the appropriate location inside the car to allow maximum
visibility ofit
LED blinking pattern with various standby modes while ignition" OFF"
Different standby modes Pattern of LED blinking
The remote engine being started LED solid on
System in disarm mode No LED
System in arm mode
* * * * * * * * * *
Daily auto·start time ON
** ** ** ** ** **
**
**
Ternp-controlled auto-start ON
*** ***
***
*** *** ***
Daily auto-start time ON
+
Temp-
#<***
**** ****
****
****
auto-start ON
Valet mode ON ***** ***** ***** ***** *****
24. [Replacement of battery[
When
c~.
appears on the remote LCD, its battery is about to exhaust. Replace a
new battery immediately to ensure proper function.
*
Replacement guide
1. Take off old battery
2. Press and release [ I ] once before inserting the new battery
3. . Inser] the new battery [Alkaline battery of size AAA is recommended ]
4. Replace the .. battery cover and then press and release [. I ] to monitor the car's
current status.
16