Code Alarm TW-1 Owner's Manual page 14

J
12. I Remote Active channel
#
2 I (for example use of headlight auto turn-on)
(a) - This function can be controlled regardless of the main system in arm or disarm
modes. ( an additional relay is required and can be programmed for any desired
remote control function ). For example: to turn headlight ON for 30 sec by remote
unit and automatically turns off.
@Tl
(b) , Press quickly (ill] 2 or more times to pop up the cursor and move it on to (@]
(c) - Then press and release
(IT].
The parking light flashes 2 times and headlight turns
on for 30 sec before automatic turn-off.
• The remote unit displays the •
(~H21 ~
on its screen and sounds melody.
*
This can be programmed in accordance with function you require.[option program
table] •
13. Ir-C=-a-r-cI'--o-c-at'--o-r,C-s-e-a-rc
7
h'I
(a)' Press and release both(
I
+
IT]
simultaneously; siren chirps 6 times with 6 parking
light flashes.
• The remote unit displays the car's current status on its screen and sounds melody.
14. I Remote Shock sensor bypass I
(a) - You can use this function to avoid false alarm especially when the car is parked in
an area near a rail-line or where trucks frequently passes by.
Iill!l
(b) - Press quickly (
IT ]
2 or more times to pop up the cursor and move it onto
(~]
(c) , Then press and release (IT] to have remote shock sensor bypass during which
shock sensor becomes ineffective but the other security functions like door trigger
are still effective.
• The remote unit displays
.~.
and •
~ ~
on its screen with one beep alert.
*
If the shock sensor is triggered for 8 consecutive times during arm mode, the
system will ignore shock sensor trigger and bypass it.
15. I Alarm mode & warn away I
(a) , In arm mode; if the car detects any impact, the shock sensor's first stage alert is
triggered. The siren chirps 3 times with 2 parking light flashes.
11