Remote Check Car Indoor Temperature/Status - Code Alarm TW-1 Owner's Manual

J
)
. .
9.
I
Remote monitor temperature/status check
I
(a) , Press quickly [m) 2 or more times to pop up the cursor and then
move
it onto
d~b
(b) , Press and release [II] to monitor in-car temperature and the status of the car.
Parking light flashes 3 times.
• The remote unit displays on its screen the in-car temperature with car's security
status and will sound melody. For example, the •
23t.
on the LCD describes the
interior temperature of the car is at 23 degree centigrade.
• The temperature modes on the LCD can be selected to show Celsius or Fahrenheit
as needed.[option program table].
10.
I
Remote trunk release
I
(The car must have electric motor for trunk release)
(a) , Regardless of the main system in lock/arm or unlock/disarm modes, remote trunk
release can be done.
(b) , Press and hold [II) for remote trunk release. Siren chirps 3 times with 3 parking
light lashes.
• The remote unit displays • .."..,. • on its screen along with the current status and
sounds melody.
Note: The remote LCD displays •
~.
when the main system bypasses the shock
sensor at the moment the remote trunk open is operated by the 'remote unit.
11.
[ II) to choose audible arm
mode.
~
(b)'
Move
the cursor
onto[~],then
press and release [II ]to choose mute arm mode .
• The remote 'unit will response as below:
(c) • When the system enters audible arm mode, the remote unit displays •
(U ••
with
melody sound.
(d)' When the system enters mute arm mode, the remote unit displays·(~ .with melody
sound.
(e) ,
Even
the system is mute arm mode, the siren will blurt when remote panic or
remote anti-carjack is
activated
(f) , Programmable for choice of Siren or Horn [option program table)
10