Remote Change Of Engine Run Time; Remote Engine Shut Off - Code Alarm TW-1 Owner's Manual

)
(c) , The remote start run time can be programmed as required [option program table].
When the preset run time expires, the engine will automatically shotoff:[-The~
remote unit displays 'r 01. when the last one min begins its countdown ]. The 'r
00. displays on the remote unit at the moment of engine shut-off and then
disappears.
(d) , Remote engine start cannot be done under such abnormal conditions. (1).The gear
is not in its neutral position, (2) Ignition key is turned ON , (3) Hood is opened ,(4)
Hand break is depressed .Only under normal condition, the system can be
remote-started for the pre-set runtime. A maximum of 4 start efforts will be made in
case of failure of engine-start in the preceding trials. If engine gets started in any
stage of trials, no second attempt wHi be made.
• When the system fails engine start after the
41h
unsuccessful start effort, the remote
unit sounds 4 beeps and its LCD displays 'SP.
.
5.
I
Remote change of engine run time
I
(a) , After the engine gets started by the remote unit
(b) , Press ill button quickly twice or more the to pop up the cursor and move the
~
cursor on to the
[~]
column.
(c) ,Press and release [IT] button. Each time press on this button can add up 5 min
run time and additional pressing can get up to the maximum run time of 20 min. The
LCD on the remote unit displays the current run time acquired. The 'r 15. on the
LCD rneans the current run tirne you have gained is 15 min.
Note: The function of run time change is only accessible only when the engine is
running.
6.
I
Remote engine shutoff
I
(a) , The engine is running by remote unit.
--"
(b) , Press and hold [ I ] ; the engine shuts off with 2 siren chirps and 2 parking light
flashes.
• The
,'J:
.disappears frorn the remote unit's screen .The car's status is displayed on
the remote unit and melody is heard.
8