Smeg Oven User Instructions page 25

Pyrolysis
5. The display shows "Pyro" to indicate that
the appliance is carrying out the
automatic cleaning cycle.
6. Two minutes after the pyrolysis cycle has
started the door is locked (the door lock
indicator light
that prevents the door from being
opened.
It is not possible to select any
function once the door locking
device has been activated.
7. Press the temperature knob to display the
time remaining to the end of the pyrolysis
cycle.
8. At the end of the pyrolysis cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels. Wait for the oven to cool
down and collect the residues deposited
inside with a damp microfibre cloth.
During the first pyrolysis cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolysis.
Cleaning and maintenance
comes on) by a device
During the pyrolysis cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolysis cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolysis gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time
for successive cleaning cycles.
Setting of programmed pyrolysis
It is possible to program the pyrolysis start
time.
9. After selecting the pyrolysis cycle
duration, press the temperature knob.
The display shows the current time and
the indicator light comes on.
10. Turn the temperature knob to set the
time at which you wish to terminate the
pyrolysis cycle.
11. After a few seconds, the
indicator lights remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
It is not possible to select any
function once the door locking
device has been activated.
and
27