Table of Contents
Advertisement
1. Names and functions
1. Names and functions
(1) LCD display
For an explanation of windows displayed, see the next page.
(2) to (5) [F1] to [F4] function keys
The function of each function key varies depending on the window currently
displayed.
Refer to the next page and "8. List of function key functions"
(6) [ESC] key
Each time this key is pressed, modes change from one to another. Also, pressing
this key brings you back to the window one level higher in the window hierarchy.
(7) [FWD/REV] key
Each time this key is pressed, the direction of operation changes between forward
run and reverse run.
(To use this key, parameter settings need to be changed. Refer to page 1-3.)
(8) [RUN] key
Starts operation.
(To use this key, parameter settings need to be changed. Refer to page 1-3.)
(9) [STOP/RESET] key
Stops operation.
(To use this key, parameter settings need to be changed. Refer to page 1-3.)
In case the inverter has tripped, pressing this key twice in a row resets the inverter.
* If multiple commands are entered by pressing the three keys [F2], [F3] and [F4] or
[ESC], [FWD] and [RUN] in rapid succession, a stop command will be issued
instead to stop operation.
(10) Control dial
In a menu window, turn the dial clockwise or counterclockwise to select a menu item
(the item selected is highlighted) and press the dial to confirm the menu item
selected.
Turn the dial clockwise (+) to select an item that follows the item currently selected.
Turn the dial counterclockwise (-) to select an item that precedes the item currently
selected.
Selecting a menu item by turning the dial clockwise or counterclockwise and confirm
the item selected by pressing the dial are referred to as "select/confirm an item."
(2)
(1)
(11)
(9)
(8)
*1
(3) (4) (5)
(10)
1-1
(11)
(6)
(7)
Advertisement
Table of Contents
