Setting An Extended Parameter (A, C; Searching For Parameters Whose Settings Were Changed; (Search For Changed Settings) - Toshiba RKP004Z Instruction Manual

6. Operation in Parameter Setup Mode

6.5 Setting an extended parameter (a, c---)

When used with a VF-MB1 inverter, you can set an a and c function.
1
Select/confirm "Extended parameters (a,
c---)" using the control dial.
The Extended Parameters (a, c---) window
appears.
Functions of function keys
: Displays parameters in the number range of
F1
C900.
The number displayed decrements each time
this key is pressed.
: Displays the previous window.
F2
: Displays the next window.
F3
: Displays parameters in the number range of
F4
C000.
The number displayed increments each time
this key is pressed.
2
Change the parameter setting.
To do this, perform steps 2 and 3 in the "6.2 Setting a basic parameter" section.
6.6 Searching for parameters whose settings were
changed (Search for changed settings)
The remote keypad is capable of displaying parameters whose current settings are
different from their default settings, and their current settings.
1
Select/confirm "Changed Parameters" using
the control dial.
The Changed Parameters window appears.
Functions of function keys
: Brings you to the Top View Mode.
F1
: Displays, in reverse order, parameters whose
F3
settings were changed.
: Displays, in normal order, parameters whose
F4
settings were changed.
Extended Parameters (A, C---)
A900 : Input func target 11
A901 : Input func cmd 12
A902 : Input func target 12
A903 : Input func cmd 13
A904 : Input func target 13
C9--
Top
6-5
Parameter Setup Mode
F1 F2 F3
Parameter Setup Mode
Changed Parameters
［U - - -］
Waiting for search
Back
F1 F3
C0--
F4
Next
F4