List Of Function Key Functions - Toshiba RKP004Z Instruction Manual

10. Warranty

9. List of function key functions

The abbreviations and graphic symbols displayed at the bottom of the window refer to
the functions of function keys, and the pressing a function key performs the
corresponding function. The abbreviations and graphical symbols in the window
correspond to the [F1] to [F4] keys, respectively starting from the left.
Press the [F1] key to perform this function.
Press the [F2] key to perform this function.
Press the [F3] key to perform this function.
Press the [F4] key to perform this function.
Here are the functions keys available and their functions.
Display
Function
Display
key
position
[F1] key Far left
[F2] key Left center
Right
[F3] key
center
[F4] key Far right
*The dedicated parameter of VF-MB1.
Item
displayed
Switches between Quick mode and Standard Setting
Quick
mode.
Panel Switches between Operation Panel and Remote.
Loc/Rem Switches between Local and Remote.
Update Measurements for Peak/Minimum Hold starts.
Top Brings you to the Top View Mode.
Displays parameters in the number range of F900 ~
F9-- ~ F1--
displays parameters in the number range of F100.
A9-- Displays parameters in the number range of A900.
Displays parameters in the number range of C900 ~
C9-- ~ C0--
displays parameters in the number range of C000.
×1000 Selects the position of hundreds.
Lng Brings you to the Language selection window.
Displays the previous window.
×100 Selects the position of tens.
Displays the next window.
×10 Selects the position of ones.
Displays, in reverse order, parameters whose
Back
settings were changed.
Copy Brings you to the copy mode.
--- No function.
Mon Brings you to the Top View Mode.
Prm Brings you to the Parameter Setup Mode.
Displays parameters in the number range of 100 ~
F1-- ~ F9--
displays parameters in the number range of 900.
A9-- Displays parameters in the number range of A900.
Displays parameters in the number range of C900 ~
C9-- ~ C0--
displays parameters in the number range of C000.
JOG Executes a jog run command.
×1 Selects the first decimal place.
Displays, in normal order, parameters whose
Next
settings were changed.
Info Brings you to the memory information.
FWD 60.0 Hz
Quick
Function
9-1
Top View Mode
STOP
0.0
Hz
Lng
---
Reference
5-1
5-2
5-2
5-2
5-4
6-4
6-5
6-5
5-1
5-1
6-1
5-1
6-1
5-1
6-5
8-1
-
6-1
7-1
6-4
6-5
6-5
5-5
5-1
6-5
8-4