Copy To Inverter - Toshiba RKP004Z Instruction Manual

8. Operation by a copy function

8. 2 Copy to inverter

There is no data in LCD remote keypad, and copy it to LCD remote keypad at the time of
purchase. (Chap.: 8.1)
Push the Function F3 key on an initial screen and the copy mode screen is displayed. It is
not possible to drive with the [RUN] key in the following 3～5 screen display.
1
Select the memory saving group using the
control dial.
2
Select copy direction [Copy to the inverter
memory] using the control dial.
It is not possible to copy to the inverter
when there is no information in the selected
memory. Copy to the LCD remote keypad first
(ref.: Chapter 8.1).
3
Display of copy waiting
Copy starts when the function [F4] key is input
4
Display of copy loading（fixed screen）
Copy finishes in 1 minute. . When the copy
is not completed even if it waits 2 minutes
or more, please reset a power supply and
copy again.
5
Display of copy finish
Return to the copy direction window
as above "2" when press the ESC key
after copy.
Top
Top
Please push F4 key
when starting
Top
Now loading.
Please wait for about 1 min.
C o p y w a s c o m p l e t e d n o r m a l l y.
Please push ESC-key.
CRC code：6AE3
Top
8-3
Copy Mode
Group selection
Memory - A
Memory - B
Info
Copy Mode
Memory - A
Group selection
［Copy to the inverter］
［Copy to the LCD memory］
Copy Mode
Memory - A
［Copy to the inverter］
Waiting
［LCD メモリへコピー］
Start
Copy Mode
Memory - A
［Copy to the inverter］
Loading
Copy Mode
Memory - A
［Copy to the inverter］
Finish
F4