Names And Functions - Toshiba RKP004Z-0 Instruction Manual

1. Names and functions

1. Names and functions
‡ @ LCD panel
For an explanation of windows displayed, see the next page.
‡ A to ‡ D [F1] to [F4] function keys
The function of each function key varies depending on the window currently
displayed. For details, see the pages explaining how to operate the unit.
‡ E [ESC] key
Each time this key is pressed, modes change from one to another. Also, pressing
this key brings you back to the window one level higher in the window hierarchy.
‡ F [FWD/REV] key
Each time this key is pressed, the direction of operation changes between forward
run and reverse run.
(To use this key, parameter settings need to be changed. ⇒ Refer to page 1-3.)
‡ G [RUN] key
Starts operation.
(To use this key, parameter settings need to be changed. ⇒ Refer to page 1-3.)
‡ H [STOP/RESET] key
Stops operation.
(To use this key, parameter settings need to be changed. ⇒ Refer to page 1-3.)
In case the inverter has tripped, pressing this key twice in a row resets the inverter.
* If multiple commands are entered by pressing the three keys [F2], [F3] and [F4] or
[ESC], [FWD] and [RUN] in rapid succession, a stop command will be issued
instead to stop operation.
‡ I Control dial ([ENTER] key)
In a menu window, turn the dial clockwise or counterclockwise to select a menu item
(the item selected is highlighted) and press the dial to confirm the menu item
selected.
Turn the dial clockwise (+) to select an item that follows the item currently selected.
Turn the dial counterclockwise (-) to select an item that precedes the item currently
selected.
Selecting a menu item by turning the dial clockwise or counterclockwise and confirm
the item selected by pressing the dial are referred to as "select/confirm an item."
‡ A
‡ B
‡ @
‡ H
‡ G
‡ I
*1
1-1
‡ C ‡ D
‡ E
‡ F