Test Results - Bayer HealthCare Contour next User Manual

AutoLog
Your meter comes with an AutoLog feature that lets you
mark your test result as Fasting, Before Meal, After Meal and
No Mark.
Fasting
– The Fasting marker is used when testing blood
sugar levels after going without food or drink for at least
8 hours.
Before Meal
– The Before Meal marker is used when
testing blood sugar levels within 1 hour before a meal.
After Meal
– The After Meal marker is used when testing
blood sugar levels within 2 hours after the first bite of a meal.
No Mark – No Mark can be selected if you are testing at other
times than before or after a meal or fasting.
Your meter comes with AutoLog turned on. You will get
the most information from each result if you keep this
feature turned on.
AUTOLOG
Testing...
Fasting
Before Meal
After Meal
No Mark
16 ®

Test Results

Test Results with AutoLog On
®
• Your C N meter comes with AutoLog on.
ONTOUR EXT
You can turn AutoLog off using the Setup menu
(see page 44).
AUTOLOG After you place blood on the test strip,
your test result will not display until you
Select Mark
make an AutoLog selection. Use the
Fasting
L or M button to select Fasting, Before
Before Meal
Meal, After Meal, or No Mark, and then
After Meal
press the OK button.
No Mark
If your result is outside your Target range
setting, you will see your result without
pushing a button.
Testing...
To get the most from your AutoLog
feature, mark your test result right away.
5
If you make your AutoLog selection very
quickly, you may see the remainder of
the testing countdown.
If you have not made your AutoLog selection within 1 minute,
the screen will dim. Press any button to turn the screen back
on and make your choice. If you have not made your choice
within 3 minutes, the meter turns off. Your blood sugar result
will not be lost — it will be stored in Logbook as No Mark.
CAUTION: If your result is above or below your set
Target ranges, you will always see your result without
pushing a button.
17