Getting Ready To Test - Bayer HealthCare Contour next User Manual

Getting Ready to Test

Read your C
ONTOUR
®
M 2 lancing device insert and all instructional
ICROLET
materials provided in your meter kit before testing.
Please follow all instructions for use and care exactly
as described.
Examine product for missing, damaged, or broken parts.
If the test strip bottle is open inside a new box of strips,
do not use those strips. Contact Bayer Diabetes Care
Customer Service at 1-800-348-8100, available 24 hours
a day, 7 days a week, for replacement parts.
CAUTION: Your C
ONTOUR
®
with C N test strips and C
ONTOUR EXT
control solutions.
Have all the materials you will need ready before you
begin testing. This includes your C
meter, C N test strips, and the M
ONTOUR EXT
lancing device and M
ICROLET
need C N control solution to perform a quality
ONTOUR EXT
control check. C
ONTOUR
separately if not included in the meter kit.
WARNING
Always wash your hands well with soap and water
and dry them well before and after testing, handling
the meter, lancing device or used test strips.
10 ®
® N user guide, the
EXT
® N meter only works
EXT
®
N
ONTOUR EXT
N
ONTOUR EXT
2
ICROLET
®
lancets. You may also
N control solutions are sold
EXT
Preparing the Lancing Device
Read the M ® 2 lancing device insert for complete
ICROLET
instructions. For Alternative Site Testing instructions, see
page 20.
WARNING: Potential Biohazard
The M 2 lancing device is intended for single
ICROLET
patient use only. The M
ICROLET
be used for assisted blood draws by health care
providers or at health care provision sites, and
should never be shared with anyone else, even a
family member, due to risk of infection. Use a new
®
M lancet each time you test because it is no
ICROLET
longer sterile after use.
2 device should not
1. Remove the endcap
from the M 2
ICROLET
lancing device with your
thumb on the grip indent
as shown. Snap the
endcap off from top to
bottom.
2. Loosen the round
protective cap on a
lancet by rotating it
¼ turn, but do not
remove it.
11