Turn Off (Mute) Outputs; Resetting To Factory Defaults - Binary B-100-HDMATRIX-4X4 Owner's Manual

6.1.2 Turn Off (Mute) Outputs

Mute one Output Example: Output=1
1. Press OUTPUT
2. Press Number Key (1-8) to select Output
3. Press OUTPUT OFF
4. Press ENTER
Mute All Outputs
1. Press OUTPUT
2. Press ALL to select All Outputs
3. Press OUTPUT OFF
4. Press ENTER
6.1.3 Display Status
Example: Input=3
1. Press STATUS
2. Press OUTPUT
3. Press Number Key (1-8) to select one Output
4. Press ENTER

6.1.4 Resetting to Factory Defaults

This procedure resets the B-100-HDMATRIX to factory defaults:
EDIDs - 1080i Stereo (embedded 8), I/O - All Outputs set to Input 1, DHCP (8x8 only) - Enabled.
1. Press DEFAULT
2. Press DEFAULT
3. Press DEFAULT
4. Press DEFAULT
5. Press ENTER
Note that resetting factory defaults can take up to 2 minutes to complete.
© 2011 Binary
B-100 HDMATRIX Installation and Users Manual 4X4 & 8X8
Display Readout (Example)
--
1-
10
10
Display Readout (Example)
--
A-
A0
40
Display Readout (Example)
Example Out-
put=3, Input=4
--
--
3-
34
Display Readout
(Example)
E-
--
--
DD
D-
Example Out-
put=3 Muted
--
--
3-
30
pg.17