Table of Contents
Advertisement
10.1.2. Turn Off (Mute) Outputs
Mute one Output Example: Output=1
1. Press OUTPUT
2. Press Number Key (1-4) to select Output
3. Press OUTPUT OFF
4. Press ENTER
Mute All Outputs
1. Press OUTPUT
2. Press ALL to select All Outputs
3. Press OUTPUT OFF
4. Press ENTER
10.1.3. Display Output Status
1. Press STATUS
2. Press OUTPUT
3. Press Number Key (1-4) to select one Output
4. Press ENTER
10.1.4. Resetting to Factory Defaults
This procedure resets the B-120-HD-MATRIX to factory defaults:
•
EDIDs - 1080p Stereo (embedded EDID 2)
•
I/O - All Outputs set to Input 1
•
1CAT EDIDs cleared, DHCP - Enabled.
Reset Factory Defaults
1. Press DEFAULT
2. Press DEFAULT
3. Press DEFAULT
4. Press DEFAULT
5. Press ENTER
Note: Resetting factory defaults can take up to 2 minutes to complete. Wait until the screen displays an output and
input selection of 1.1 before attempting further setup or use.
Display Readout (Example)
--
1-
10
10
Display Readout (Example)
--
A-
A0
40
Display Readout (Example)
Example Output=3,
Input=4
--
--
3-
34
Display Readout (Example)
E-
--
--
DD
D-
16
Example Output=3
Muted
--
--
3-
30
Advertisement
Table of Contents
