Installation; Figure 25: Conversion To Access Point Mode - HP Wireless LAN 802.11b/g Device WN4201B User Manual

7.1 Installation

In order to install the SoftAP™ (first use only. For future uses see Chapter 8, Access Point Mode).
Refer to the Figure below:
1. Go to the Start menu on your desktop
2. Select All Programs
3
2
1

Figure 25: Conversion to Access Point Mode

3. Select Wireless Software Access Point
4. Select Install Wireless Software Access Point
The Software Access Point will activate on your HP PC with assistance from the InstallShield
Wizard.
No action is required through this process.
Warning: Interruption of the activation process may result in the inability of the
SoftAP™ to function.
Wireless LAN 802.11b/g Device
4
35