HP Wireless LAN 802.11b/g Device WN4201B User Manual page 23

3. Uncheck the box "The key is provided for me automatically".
4. Verify that the Network Authentication is set to WPA-PSK.
5. Verify that the Data Encryption is set to TKIP.
6. Input the Network Key of your Access Point, Wireless Broadband Router or Wireless
Gateway.
A 8 – 63 character alphanumeric key-phrase is necessary when using the WPA interface.
Note:
WPA does not require HEX or ASCII notation common with WEP keys.
enabled device should already have a 8 – 63 character alphanumeric key-phrase.
Consult the information asked for in section 5.2 .
7. Input the Network Key a second time into the "Confirm network key" box.
8. Select OK.
You are returned to the Wireless Network Connection Properties dialog box and are able to
verify your connection.
Wireless LAN 802.11b/g Device
Your WPA
23